3–Viewing Router InformationiSCSI Presented TargetsISR645610-00 B 3-35 Target Type for the array can be specified as either Source, Destination,Src+Dest (both source and destination type), or None. Array Bandwidth can be specified as one of the following: Slow(50BMB/s), Medium (200BMB/s), Fast (1600MB/s), User Defined, or MaxAvailable. User-defined Bandwidth (MB/s) becomes available if the selected ArrayBandwidth setting is User Defined. Type an integer in the box. Load Balancing is either Enabled or Disabled for this array. LUN Info Display determines whether the array’s LUNs are identified byLUN ID, WWULN, or Serial Number. Array License shows whether a data migration array license has beenapplied to the array. Physical Target Ports information includes: Port specifies the target port number. WWPN specifies the target port WWPN. Port ID indicates the ID assigned by the Fibre Channel fabric orAL_PA when connected on a private loop.iSCSI Presented TargetsSelecting the iSCSI Presented Targets branch on the router tree does not provideany information in the right pane. Expand the iSCSI Presented Targets branch,and then select a specific presented target to view the Information page for thattarget in the right pane.InformationThe Information page for an iSCSI presented target contains the information andoptions shown in Figure 3-26.NOTE:To apply changes made to this page, click Save.
