6–Command Line Interfaceshow migration_luninfo6-74 ISR654608-00 Bshow migration_luninfoProvides the current status and path information for any array LUN. Use thiscommand to check the usability of a path in failover scenarios. The pathsspecified as passive are not used by data migration jobs if the current path fails.The passive path is only capable of reading the LUN size, vendor, and productinformation, but cannot perform any I/O operation.Authority guestExamples The following example shows the show migration_luninfo command.iSR6200 <1> #> show migration_luninfoIndex WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type----- --------------------------------- -------------------- -------------0 50:0a:09:81:95:95:82:2c, 00-00-00 NETAPP LUN-0 Src+Dest1 50:06:01:68:4b:a0:35:f6, 61-04-00 DGC RAID-3 Src+Dest2 21:00:00:14:c3:3d:d3:25, 48-00-dc SEAGATE ST336754FC-2 Src+Dest3 21:00:00:14:c3:3d:cf:88, 48-00-da SEAGATE ST336754FC-1 Src+DestPlease select a Target from the list above ('q' to quit): 1Index (LUN/VpGroup)----- -------------0 0/VPGROUP_11 4/VPGROUP_12 5/VPGROUP_13 6/VPGROUP_14 7/VPGROUP_15 8/VPGROUP_16 9/VPGROUP_17 10/VPGROUP_18 11/VPGROUP_1Please select a LUN from the list above ('q' to quit): 1LUN Information-----------------WWULN 60:06:01:60:70:32:22:00:c6:02:f7:88:09:22:df:11LUN Number 4VendorId DGCProductId RAID 5ProdRevLevel 0223Portal 0
