A–Configuring the Data Path Through iSR6200 for Online Data MigrationWindows Multipath ConfigurationA-2 ISR654608-00 BWindows Multipath ConfigurationTable A-1. Configuring Microsoft MPIO on Windows 2008OS Windows 2008Multipathing software Microsoft MPIOMultipath installationverification1. In the Windows Device Manager, check the Disk drives and ver-ify that the multipath disk is present.2. Right-click the multipath disk and check the MPIO properties toconfirm the status of the paths, failover policy, and MPIO soft-ware name.Validations During Router Insertion ProcessRemoving first direct path fromcontroller port (for example,Port A)1. Zone out the first direct path from the Fibre Channel switch.2. Refresh the Device Manager to verify that the path has beenremoved from the disk list.Adding router path for theremoved controller port.(forexample, Port A)Add the first router path by zoning the target map and host ports.Windows Device Manager identifies the new disk drives.Removing second direct pathfrom controller port (for exam-ple, Port B)1. Zone out the second direct path from the Fibre Channel switch.2. Refresh the Device Manager to verify that the path has beenremoved from the disk list.Adding router path for theremoved controller port.(forexample, Port B)Add the second router path by zoning the targetmap and host ports.Windows Device Manager identifies the new disk drives.
