5–Performing Data MigrationPresenting LUNs to the iSR6200ISR654608-00 B 5-3Presenting LUNs to the iSR6200Data migration requires that LUNs from both the source and destination storagearrays are presented to the iSR6200 as shown in the following sections: “LUN Presentation from Fibre Channel Arrays” on page 5-3 “LUN Presentation from iSCSI Arrays” on page 5-4LUN Presentation from Fibre Channel ArraysThis section provides the procedures for presenting LUNs and discovering FibreChannel storage arrays for offline data migration.To present source and destination LUNs from Fibre Channel arrays:1. Zone in source array controller ports with iSR6200 Fibre Channel ports.Refer to the appropriate topology shown in “Data Migration Configuration”Migrate andMonitor10.For offline data migration, ensure thatserver has no longer access to sourceLUNs.Deactivate zones 1 and 2 as describedin “Data Migration Configuration” onpage 2-3.11.For online data migration, ensure thatPre-Migration step 7 in this table iscompleted.“Presenting LUNs to the Server forOnline Data Migration” on page 5-512.For data migration jobs with schedul-ing type Configure Only or SerialSchedule, specify the start time forthe job.“Starting Serial Scheduled Jobs” onpage 5-1613.Monitor data migration jobs. “Viewing Job Details and Controlling JobActions” on page 5-1714.Acknowledge the data migration jobs. “Acknowledging a Data Migration Job”on page 5-25Post-Migration15.Export data migration logs. “Viewing System and Data Migration JobLogs” on page 5-2016.Remove arrays from persistence. “Removing an Offline Array” onpage 5-2617.Check license usage. “Viewing Data Migration License Usage”on page 4-6Table 5-1. Data Migration Process Flow (Continued)Category Activity For Details, See…
