Qsan XCubeDAS XD5324D User Manual

Contents

Table Of Contents
Table Of Contents
about this manual
Getting Started with CLI
Figure 1-3 The Procedures of Setup Serial Console by HyperTerminal
Figure 1-4 The Procedures of Setup Serial Console by PuTTY
CLI Commands
CLI Command Sets
General System Settings
Set the System Name (sysname)
Set Date and Time (date)
Set Password (setpwd)
Storage Management
Show Disk Information (disk)
Set Zone Configurations (zone)
Figure 2-1 All SAS Ports Access All Disk Drives Diagram
Figure 2-3 SAS Ports and Disk Drives Divided into Five Groups Diagram
Maintenance
Firmware Download (fwdl)
Reset to Factory Defaults (rtdft)
Identify the System or the Disk Drive Slot (ident)
Reboot the System (reboot)
Shutdown the System (shutdown)
Logout (logout)
Show Event Logs (evtlog)
Mute the Buzzer (buzzer)
Show Temperature Information (temp)
Show Voltage Information (volt)
Show PSU Information (psu)
Show Fan Information (fan)
Show Sensors Information (sensor)
Support and Other Resources
Documentation Feedback
Appendix

Qsan XCubeDAS XD5324D User Manual Manual pdf 43 page image

CLI Command Sets 31 temp: Show temperature information of the system volt: Show voltage information of the system psu: Show PSU (Power Supply Unit) information of the system fan: Show fan information of the system sensor: Show temperature, voltage, PSU, and fan informationINFORMATION:For more information about system components, please refer to chapter2, System Components Overview in the XCubeDAS Hardware Owner’sManual.2.6.1. Show Temperature Information (temp)CommandtempDescriptionShow the temperature sensors information of the system.SyntaxtempParametersnoneExampleShow the 11 temperature sensors in system.

/ 53

This manual is suitable for:

XCube DASXD5324S XCubeDAS XD5312D XCubeDAS XD5312S XCubeDAS XD5316D XCubeDAS XD5316S XCubeDAS XD5324D XCubeDAS XD5326D XCubeDAS XD5326S

manualsdatabase

Your AI-powered manual search engine