Quadra-Fire 31M-ACC-GT Owner's Manual

Quadra-Fire 31M-ACC-GT Owner's Manual Manual pdf 24 page image

Page 24 7033-277C March 2, 2007R3100 Wood Stove Series (ACC)N OTE: When the speed control is turned clockwise,it will click on to high speed. Continue to turn thespeed control clockwise to decrease the speed. Atfull clockwise, the blower should blow gently, butshould not stop.1. With the appliance plugged in, turn the speedcontrol knob to slow (full clockwise).2. With a small screwdriver, adjust the blower speedby turning the adjustment mechanism through thehole on the side of the speed control.3. Adjust the speed so the blower runs slowly, butdoes not stop. Turn clockwise to slow the blowerand counterclockwise to increase the speed.The blower speed control for this unit is adjusted at the factory,and normally does not require further adjustment.D. Adjusting The Blower Speed ControlC. Door Handle Assembly1. Install washer on door handle shaft.2. Slide door handle through door.3. Install second washer(s) as shown.4. Install key in groove.5. Align groove in latch cam with key; slide latch camover shaft6. Install locknut but do not overtighten as the doorhandle needs to move smoothly.7. Install spring handle turning in a counter-clockwisemotion to desired location on door handle rod.Figure 24.1LocknutDoor Cross Section(example)Latch CamSpacingWashersSquare KeyDoor HandleSpringHandleCAUTION• Do NOT overtighten lock nut.• Door handle needs to move smoothly.