Quadra-Fire 31M-ACC-MBK Owner's Manual

Also see for 31M-ACC-MBK: Owner's manual Owner's manual Owner's manual Owner's manual Manual

Quadra-Fire 31M-ACC-MBK Owner's Manual Manual pdf 23 page image

July 7, 2011 7033-277IPage 233100 Wood Stove Series (ACC)RB. Leg Kit and Ash Removal Installation(ARS) for Step Top Uni-BodyDo NOT tilt the unit on the cast iron legs.• Tilting could lead to property damage.• Lift the unit upright and place it into position on thefloor protector.CAUTIONLay stove flat on itsback on protectivepadding or palletInsert 2 bottomscrews looselyAsh DrawerLeg BracketsNOTE: The Ash Removal System, must beinstalled first before installing the legs.Figure 23.1Figure 23.2Leg Mounting Brackets arepackaged inside firebox.Leveling Legs atopposite cornersInstalling Leg Kit1. Remove leg mounting brackets packaged inside firebox.2. Attach the 2 bottom screws of the mounting brackets tothe bottom of the stove with 1/4”-20 Phillips head screws.These screws are located in the component pack .Leave the bottom 2 screws loose so you can slide the ashpan assembly bottom slots over the screw heads. This al-lows the weight of the ash pan to rest on the screws whileyou are attaching the top 2 screws. Once the ash pan isattached, tighten all screws. Figure 23.2.3. Loosely assemble bolts into the corner of the mountingbrackets for leg attachment. Figure 23.1.4. Slide legs onto mounting brackets making sure the legsare up against the bracket and secure with bolts supplied.There are leveling bolts in 2 legs. These leveling legsshould be in opposite corners. Figure 23.1.5. Carefully stand stove up and place in desired location.Do NOT tilt up on the cast iron legs, it could damage thelegs.6. Use leveling bolts on legs to stabilize and level stove.Finishing the ARS Installation1. Follow steps 1 through 3 on page 22. See also Figure22.2.Begin installing the ARS System.1. Follow steps 1 through 6 on page 22. See also Figures21.2 and 21.3.