Quadra-Fire Expression 36 Owner's Manual

Also see for Expression 36: Owner's manual

Contents

Quadra-Fire Expression 36 Owner's Manual Manual pdf 31 page image

31Quadra-Fire • Expression 36 (QV36A-FB) • 2062-900 Rev. Q • 2/10A. Recommendation for WireThis appliance requires 110-120 VAC be wired to thejunction box either for use of optional accessories or forproper operation of the appliance.1010 Electrical InformationNote: This appliance must be electrically wired and groundedin accordance with local codes or, in the absence of localcodes, with National Electric Code ANSI/NFPA 70-latestedition or the Canadian Electric Code, CSA C221.1.B. Connecting to the ApplianceWire 110V to electrical junction box.Do NOT wire 110V to valve.Do NOT wire 110V to wall switch.• Incorrect wiring will damage millivolt valves.• Uninterrupted or continuous power is requiredat all times in IPI system EXCEPT when usingbattery back-up.C. IntelliFire Ignition System WiringThis appliance requires a 110 VAC supply to the appliancejunction box for operation. A wiring diagram is shown inFigure 10.1.This appliance is equipped with an IntelliFire control valvewhich operates on a 3 volt system.This appliance is supplied with a battery pack and a 3 voltAC transformer, which requires the installation of the sup-plied junction box. It is highly recommended that the junc-tion box be installed at this time to avoid reconstruction.The battery pack requires two D cell batteries (not includ-ed). Batteries cannot be placed in the battery pack whileusing the 3 volt AC transformer. Conversely, the trans-former must be unplugged if the battery pack is used.CAUTIONBattery polarity must be correct or module damage willoccur.WARNINGFigure 10.1 IntelliFire Pilot Ignition (IPI) Wiring DiagramNote 1: Ignition module, valve, pilotand wall switch operate on 3 volts.Note 2: Plug QWSK-MLT wall switchkit into the REM/AUX outlet on thejunction box.IPIVALVEORANGEWIRES WITH LABEL “FOR USE WITH REMOTE OR WALL SWITCH ONLY”(LOCATED UNDER FIREPLACE)GREENREDREDGROUNDPIGTAILGREENAUXCONNECTIONFRONT VIEWREAR VIEWG Y RBLACKBLACKACPLUGFANCONNECTIONORANGEBATTERIES12345678RYGORANGEIPIMODULEFLAMESOLENOIDFLAME HIGH/LOWBLACKREDBLACK REDREDBLACKRED(MALE/FEMALE)RED(FEMALE/MALE)ADAPTER WIRESBROWN BROWNGROUNDBLACKBROWN BROWNREDGREENYELLOW (HNG)WHITE (HTL)BATTERYIPI PILOT3V DCFLAME ONYELLOWYELLOWFAN THERMOSTATFACTORYCONNECTEDTOGETHERCONTINUOUS110VACSUPPLYBLACKWHITEGROUNDHOTFANTRANSREM/AUXNEUTRALFIREBOX LIGHTS• A 110-120 VAC circuit for this product must be protectedwith ground-fault circuit-interrupter protection, incompliance with the applicable electrical codes, when it isinstalled in locations such as in bathrooms or near sinks.• Incorrect wiring will override IPI safety lockout and maycause explosion.