Quadro Quadro6L Manual
Also see for Quadro4L: Installation guide
                                                         | |
Contents
| 
Quadro6L/4L Manual I: Installation Guide Step 2: Configuring the QuadroStep 2.2: System Configuration WizardThe System Configuration Wizard must be run upon Quadro first startup. The SystemConfiguration Wizard is a tool for the administrator to specify regional configuration set-tings and to define the Quadro's Local Area Network settings.To run the wizard, select the System Configuration Wizard from the System menu.For the basic configuration, some pages in this wizard may be skipped and left default forthe basic configuration.Please Note: It is strongly recommended that factory default settings are left unchanged iftheir meanings are not completely understandable to the party administrating the Quadro.System ConfigurationThe first page of System Configuration Wizard shows all items to be configured. Click theNext button to start. Enter into the Host Name field the unique name (top right corner, un-der Epygi logo) for the Quadro device. The Domain Name text field requires the LAN sidedomain name which the Quadro belongs to.For a basic configuration, the LAN IP address does not need to be changed, but if youmust change it (for example, to integrate the device into an existing LAN), record the newLAN IP address and have it handy. You’ll need it for subsequent access to Quadro’s man-agement from its LAN interface.Please Note: The Host Name is very useful when many Quadro's are part of a networkand one administrator has remote access to all of them. All Quadro pages show the host-name on the top right corner under Epygi logo.Fig. l- 18: System Configuration pageClicking Next shows the page DHCP Settings for the LAN Interface.Quadro6L/4L; (SW Version 5.2.x) 21 |
Related manuals for Quadro Quadro4L
manualsdatabase
Your AI-powered manual search engine