Quadro6L/4L Manual I: Installation Guide RequirementsRequirements• One 120/240 VAC power outlet in close proximity to the Quadro.• One RJ45 Ethernet 10/100 broadband Internet connection.• At least one RJ11 telephone connection is recommended to connect the Quadro tothe PSTN network.• At least one IP phone with an RJ45 connector connected to the Quadro WAN portdirectly or through a hub or switch.• One CAT 5 Ethernet cable with an RJ45 connector to connect to the Quadro LANport.• One PC with a 10/100 Mbps Ethernet card or adapter installed.• TCP/IP network protocol installed on each PC.• For optimal results, Internet Explorer 5.5 or higher, or Netscape Navigator 4.7 orhigher are recommended.Please Note: The Quadro6L/4L is shipped with one RJ11 cable and one straight RJ45CAT 5 cable. If the LAN connector of the Quadro connects to a hub or switch, a crossovercable may be required.Quadro6L/4L; (SW Version 5.2.x) 7