Chapter 3 Operator CommandsUnloading a Drive70 Quantum P4000 and P7000 Libraries User’s GuideThe Move Cartridges command continues until completed unlessyou press the Abort button to stop the operation.Unloading a Drive 3The Unload Drive command prepares a tape cartridge to be removed froma drive by rewinding and ejecting the cartridge. After unloading thedrive, remove the tape cartridge using the Move Cartridges command.To unload a drive:1 On the Operator screen, press the Unload Drive button.The GUI displays the Control: Unload Drive screen (see figure 40).Figure 40 UnloadDrives Screen2 Use the arrow buttons to highlight the desired drive and then pressExecute.The GUI displays a Command In Progress dialog box.Overview Tapes OperatorBack Forward HomeOControl: Unload DriveSystemOff-lineStandbyLoad PortStopExecuteDrive 0About
