Quatech DSC-300 User Manual
Also see for DSC-200: User manualSpecifications
                                            | |
Contents
| 
3 Hardware Installation1. Turn off the power of the computer system in which the DSC-200/300 is to be installed.2. Remove the system cover according to the instructions provided by the computermanufacturer.3. Make any desired optional jumper setting changes.4. Install the DSC-200/300 in any empty PCI expansion slot. The board should be securedby installing the Option Retaining Bracket (ORB) screw.5. Replace the system cover according to the instructions provided by the computermanufacturer.6. Attach and secure the cable connectors to the desired equipment.7. Turn on the power of the computer system.The output of the DSC-200/300 is a pair of 9-pin D-connectors.SerialPort2SerialPort1Figure 6 --- Jumper/connector locationsQuatech DSC-200/300 User's Manual 12 |
Related manuals for Quatech DSC-200
manualsdatabase
Your AI-powered manual search engine