Quatech DSC-300 User Manual

Also see for DSC-200: User manual Specifications

Quatech DSC-300 User Manual Manual pdf 24 page image

2. Select the radio button for "Driver from disk provided by hardware manufacturer." Clickthe "OK" button to continue.3. An "Install From Disk" dialog box should pop up. Insert the diskette with the QuatechINF files on it, select the correct drive letter, and click the "OK" button. Windows 95automatically browses the root directory for an INF file that defines configurations forMulti-function Adapters. If no INF files are found, click the "Browse" button and searchthe Win95 sub directory on the installation diskette. You are not required to select the filename. After finding the directory containing the INF files, Windows 95 will choose thecorrect file.4. The "New Hardware Found" dialog box will appear again, this time for an "UnknownDevice."5. Again select the radio button for "Driver from CD provided by hardware manufacturer."Click the "OK" button to continue.6. Another "Install From CD" dialog box will pop up. The path should already be pointingto the Quatech CD. Click the "OK" button to continue.7. You should now see the "Copying Files" dialog box as Windows 95 copies the driverfiles from the CD.8. The installation utility will ask for your Windows 95 installation disks. Serialcommunication ports require two drivers supplied by Microsoft to function:SERIAL.VXD and SERIALUI.DLL. Insert the disk or CD and click "OK".NOTE :You may be able to skip this step if you are certain that your system has the latestversion of these files installed. If you do not have your Windows 95 install disksimmediately available, click "OK" anyway. A dialog box appears with an optionto Skip the files. Click the Skip button and the files will not be installed. This isall right if the latest version of these drivers are currently in the\WINDOWS\SYSTEM directory.9. The "New Hardware Found" dialog will repeat as each serial port is registered withWindows 95.10. Installation is complete.5.5 Windows NTThe Windows NT device driver is installed by running the SETUP program. Up to 256serial ports are supported. There is a command line-based configuration utility which is used foradding PCI bus and ISA bus serial ports. Please refer to the documentation included with thedevice driver for full installation and configuration details.Quatech DSC-200/300 User's Manual 22