P/N 480-0049-00-13 3-9Chapter 3: InstallationConnect to PC ConsoleYou will need to connect the Tenor DX to your workstation’s serial port via RS-232 connection. (This connec-tion will be used when you assign an IP address to the unit.) For the instructions below, it is assumed you areconnecting to a Windows PC.Figure 3-7 Connect to PC Com Port1. Insert the male end of the DB-9 cable into the port labeled Console. (See Chapter 2: Hardware Compo-nents for RS-232 connector pinouts.)2. Insert the female end of the DB-9 cable into your workstation’s serial port (see your PC documentation formore information about this port).1 2 3 4 5 6 7 8RESETDIAGCONSOLE POWERALERTLAN 1 LAN 2Line/Act100Line/Act100DB-9
