Quintum Tenor DX Product Manual
                                                                                                      | |
Contents
| 
P/N 480-0049-00-13 7-7Chapter 7: System AlarmsView AlarmsThe Command Line Interface (CLI) enables you to view alarms through the Monitor mode. You can viewactive alarms, as well as view an alarm history list.You are now ready to view active alarms and an alarm history, or both. See the sections which follow:Display all AlarmsYou are able to display both active alarms and an alarm history as follows:1. Through CLI, access the Monitor prompt.2. Type alarm. Both active alarms and the alarm history will be displayed. See section How to Read Alarmsfor field definitions.Figure 7-1 Alarm sampleDisplay Active Alarms1. Through CLI, access the Monitor prompt.2. Type alarm a. The active alarms will be listed. See section How to Read Alarms for field definitions. Ifyou enter alarm without a command following it, both active alarms and the alarm history will be dis-played.Figure 7-2 Active Alarm SampleIP# Sequence#Type#Severity# Desc# Slot# Device# Digital Interface# Channel# Date/Time192.168.20.136:947:ALR:1:Yellow Alarm:1:0:1:0:THU APR 14 00:00:04 2016IP# Sequence#Type#Severity# Desc# Slot# Device#Digital Interface# Channel# Date/Time192.168.20.136:947:ALR:1:Yellow Alarm:1:0:1:0:THU APR 14 00:00:04 2016 |
Related manuals for Quintum Tenor DX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine