RCA 20F510TD User Manual

RCA 20F510TD User Manual Manual pdf 4 page image

Things to Consider Before ConnectingComponentsImportant Stand and Base Safety InformationChoose the location for your TV earefLdly. Place the TV on a stand or base that is ofadequate size and strength to prevent the ]V from being accidentally tipped over, pushedoff, or pulled off. This could cause personal injury and or damage the ]V. Refer to theImportant Safeguards sheet packed with your ]V.Protect Components From Power Surges• Connect all components before plugging any power cords into the wall outlet.• Always turn off the ]V and other components before you connect or disconnect anycables.Position Cables to Avoid Audio Hum or Interference• Insert all cable plugs firmly into their jacks.• Place any Audio/Video (A/V) cables to the side(s) of the TV's back panel instead ofstraight down the back after connecting components.• Try not to coil any twin-lead antenna cables and keep them away from all A/V cables asmuch as possible.• Make sure all antennas and cables are properly grounded. Refer to the Safety Tips sheetpacked with your unit for detailed information.Protect Components From Overheating• Never block ventilation slots in any component. Arrange the components so that aircan circulate freely.• Do not stack components.• Allow adequate ventilation when placing components in a stand.• Place an amplifier or other hot component on the top shelf of a stand so heated airrising from it will not flow around other cornponents.2 Connections and Setup