RCA 20F514TD User Manual

Contents

RCA 20F514TD User Manual Manual pdf 33 page image

Chapter 1Chapter 5: Playing DiscsDVD BasicsRegional CodingThe DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. Thisunit’s code is Region 1. Discs with other regional codes can’t be played in this unit.Using Different MenusEach disc is programmed with different features. There are two separate menu systems that you can use to access DVDfeatures: the disc’s menu and the DVD player’s menu (separate from the TV’s menu system). Remember that a featureonly works if the disc was programmed with that feature. For example, if you choose subtitles, the subtitles onlyappear if the disc was created with subtitles. The DVD menu system is explained on page 37.The Disc menu – The disc menu is part of each disc and is separate from the DVD player’s menu system. The contentsof each disc’s menu vary according to how the disc was created and what features are included. Sometimes a disc’smenu appears automatically when you insert the disc, or you can access it by pressing the DISC MENU button.Types of Discs Your DVD Will Play• DVD discs – Contain video (such as DVD, DVD-R, DVD+R, DVD-RW and DVD+RW).• Audio discs – Contain musical or sound content only (such as CD, CD-R, CD-RW, CD-G, SACD and HDCD).• mp3 discs – Contain audio files (for example, a CD-R with downloaded mp3 files or WMA files- Windows MediaAudio).• CDs with JPEG files.How to Load and Play a DiscTurn on your TV/DVD player.1. Press the TV•DVD button on the remote to make sure the unit is in the DVD mode.2. Press the SLEEP• (OPEN/CLOSE) button on the remote to open the disc tray. Place a disc gently into the traywith the disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).3. Press the SLEEP• (OPEN/CLOSE) or (PLAY•PAUSE) button again to close the disc tray.The player reads the disc’s table of contents, and then one of following happens depending on how the disc wasprogrammed: If no picture or screen saver is displayed, press the TV•DVD button to put the player in the DVD mode.• The disc menu appears. (Highlight the PLAY option and press OK).• The disc starts playing automatically.• No disc menu appears, a screen saver is displayed. (Press the TV•DVD button to put the player in DVD mode).To Stop Playback1. Press the STOP button once. PRE STOP appears for several seconds. Press (PLAY•PAUSE) to resume play atthe same point.2. Press the STOP button twice. STOP appears for several seconds. Playback stops completely. Press(PLAY•PAUSE) and playback starts at the beginning of the disc.Note: Some discs might not be written to resume playback.