Chapter Select a TimeTo access a specific point of time on the DVD:1. Select time (the numbers to the right of the clock icon) with the and buttons.2. Enter the time location in the form of hh:mm:ss (hours, minutes and seconds) with thenumber buttons.3. Press OK.DVD DISPLaY FeaturePress the INFO button twice to display the DVD Display banner. The current language, audio,and subtitles are displayed. The camera icon appears on the screen when footage has angleoption available. In this display, the icon shows whether angles are in use. Press the ANGLEbutton repeatedly on the remote to scroll through camera angles, if available. Press INFO athird time for the display to disappear.1/4 ENG D5.1CH 1/2ENG OFF....LANGUAGE AUDIO SUBTITLES ANGLESANGLEbuttonChanging the Camera angleSome discs contain scenes which have been shot simultaneously from a numberof different camera angles. If the disc has only one angle, this feature won’t work.When multiple angles are available, the Camera Angle icon appears in the upperright corner of the screen. To change the camera angle:1. While you’re playing a disc, press ANGLE on the remote. The Camera Angle icondisplays the number of angles available. For example, if there are 3 differentangles, the icon reads 1 of 3. Therefore angle 1 is currently being played.2. Press ANGLE repeatedly to scroll through the camera angles.Disc Features Using the Remote ControlSelecting SubtitlesTo change the subtitle language while the disc is playing:1. Press the SUBTITLE button repeatedly2. Press SUBTITLE again to scroll through the subtitle languages available on thedisc. Choose a language and the subtitles appear in that language.Note: If you change the subtitle language on the Disc Menu your choice oflanguage only applies for the disc currently being played. When you ejectthe disc and switch off the player, the subtitles will be displayed again in thesubtitle language you selected in the DVD SETUP menu. Refer to page 38 formore information.SUBTITLEbuttonPlaying Discs