RCA 20F610TD User Manual

Also see for TruFlat 20F610TD: Specifications

Contents

RCA 20F610TD User Manual Manual pdf 12 page image

10 Chapter 2Graphics contained within this publication are for representation only.Using the Remote ControlPRESETS In TV mode, picture options are reset to original factory settings.RECORD In VCR mode, press to program your VCR to record a program.REVERSE In DVD mode, press REVERSE to go backwards on a disc.SEARCH In VCR mode, accesses Index Search feature.SKIP Press once before changing channels and the TV will wait 30 seconds beforereturning to the original channel. Press repeatedly to add more time. In DVD mode,displays the Info Display with the Angle icon highlighted.SPEED In VCR mode, selects a recording speed.STOP In DVD mode, stops playing the disc and displays the DVD’s menu system.TV Turns on the TV and puts the remote in TV mode. Also displays current status.VCR Puts the remote in VCR mode and, if auto tuning is enabled, will turn on the TVand tune to the correct video input channel.VOL – or VOL + Decreases or increases the TV’s volume.ZOOM In DVD mode, zooms in on the picture.Using the INPUT ButtonUse the INPUT button to scroll through the available video input channels and viewcomponents you have connected to the TV/DVD.1. Make sure the component you want to view is turned ON.2. Press INPUT to tune to an available video input source and view the component.3. To return to the previous channel, continue pressing INPUT.Programming the Remote to Operate OtherComponentsThe universal remote can be programmed to operate mostbrands of remote controllable components. The remote isalready programmed to operate most RCA, GE, and Proscancomponents.Notes: The TV and DVD buttons can’t be programmed on this remote.The remote may not be compatible with all brands and models ofcomponents. It also may not operate all functions of the remote thatcame with your component.Find Out If You Need to Program the RemoteTo determine whether the universal remote needs to beprogrammed for your component, turn the component ON.For example, to program the remote for a VCR, turn on theVCR. Point the remote at the VCR, and press the VCR button.Then press ON•OFF or CH + (channel up) or CH – (channeldown) to see if the VCR responds to the remote commands. Ifthe component does not respond, the remote needs to beprogrammed.DVD ON OFFVCR TVVOLMUTE GO BACKCHCLEAR MENUPRESETSCCGUIDEINFOSKIP1 2 34 5 67 8 90INPUT ANTENNAREVERSE PLAY FORWARDRECORD STOP PAUSEAGAIN ZOOM OPEN CLOSESPEED SEARCHOKOKDISC MENUVCR buttonON•OFFbuttonREVERSEand PLAYbuttons STOPbuttonYou’ll use these buttons whenprogramming the remote.CLEARbutton