15NOTE: If you select the option AUTOMATIC, the LCD will be turned on during incoming callor when a button is pressed. If you select the option ALWAYS ON, the LCD backlight willbecome always turned on.7. Press the Sel/Save button to save. To start over, press the Exit button to return to theDISPLAY SETTING menu.Ring ToneThe ringers for all lines may be set independent of one another.1. Press the Menu button.2. Use the 5 or 6 button to scroll to SOUND SETTING.3. Press the Sel/Save button.4. Use the 5 or 6 button to scroll to RING TONE.5. Press the Sel/Save button.6. Press 3 or 4 to select L1 or L2 for ring tone change.7. Then, use the 5 or 6 button to scroll to the tone selection. There are 7 ring tonesfrom which you can select from.8. Press the Sel/Save button to save. To start over, press the Exit button to return to theSOUND SETTING submenu and repeat step 5.Key Tone Volume1. Press the Menu button.2. Use the 5 or 6 button to scroll to SOUND SETTING.3. Press the Sel/Save button.4. Use the 5 or 6 button to scroll to KEY TONE VOL.5. Press the Sel/Save button.6. Use the 5 or 6 button to scroll to OFF, Low or High.7. Press the Sel/Save button to save. To start over, press the Exit button to return to theSOUND SETTING menu.Connections and Setup
