14. To dial the displayed number, pick up the handset or press Dial again.If You Did Not Program Your Local Area Code in the Setup Menu1. Press the CID button first to go into the CID review mode, and then use the 5 and 6button to scroll to the number you want to dial. You will only see 11-digit numbers(i.e. 1-234-555-1234).2. Press Dial to dial back. You may adjust the number format if FORMAT CHANGE? showsin the display.Call Waiting Caller IDThis feature lets you see (in the display) who is calling when you are on the phone andhear the call waiting tone in the receiver. The caller identification information appears inthe display after you hear the tone.IMPORTANT: In order to use this feature, you must subscribe to either the standard Name/Number Caller ID Service or Caller ID with Call Waiting Service. To know who is calling whileyou are on the phone, you must subscribe to Caller ID with Call Waiting Service.Digital Answering SystemThis unit incorporates a digital answering system with a total voice recording capacity ofapproximately 40 minutes. The messages are saved in non-volatile memory and will not belost even in the event of total power outage.Once the recording capacity of the unit is reached or a line has its maximum numberof 58 messages, the unit displays VM MEMORY FULL on the screen, and cannot recordmessage for this mailbox.Unit will announce a busy voice message to caller if system is busy and unable to servethe caller. Furthermore, this unit is able to answer and record caller messages while youare talking on the other line.Answering System IndicatorCheck the Answer L1 and L2 button/indicator for answering system status.Off: Answering system is off.On: Answering system is on.Flashing: New voice message was received.Digital Answering System