15Area Code (base only),Registration (handset only),De-Registration (base only),2nd Call Alert (both base and handset),Handset Name (handset only),Update HS List (base only).Date/TimeAdd Headset (base only)From the Phone Setting Menu:1. Press the VOL (- or +) button to scroll to Date/Time.2. Press SELECT Soft key.3. LCD will display last-set time (or, if the device is new or has been resetto default, the LCD will display 12:00AM 01/01/10)4. Use the dial-pad to enter digits for the current time and date.Note: Use DIR/CID button to move the cursor and the AM/PM softkeyto set the time AM or PM.5. Press SAVE softkey to confirm the setting, a confirmation tone willindicate that your selection has been saved.NOTE: If you subscribe to Caller ID service, the current Date/Time is setautomatically when you receive your first CID record and will overridemanually set Date/Time.NOTE: The Date/Time setting item only exists in base menu, handset Date/Time should update automatically after it is set in the base.Auto Answer (only applicable for handset)This option allows you to pick up the handset from base to answer anincoming call without pressing the Talk/Spk/L1/L2 button.When it is set to off, this function is disabled in this handset.From the Phone Setting Menu:1. Press the VOL (- or +) button to scroll to the Auto Answer.2. Press SELECT soft key. Use the VOL (- or +) button to scroll to yourselection. The default setting is Off.3. Press SELECT soft key to save your selection.Programming the Telephone