03. The originating caller can then press the CONF soft key shown on thedisplay to initiate a conference. Since Line 1 and 2 are both on hold,the user will be prompted to select Line 1, Line 2 or Both to conferencewith. The user can then use the soft keys to select the desired option.If the BOTH soft key is selected a 4-way conference is establishedbetween the originating caller, both lines and the intercom call.Intercom CallsOne-Touch Intercom1. On the base, in idle mode, press any One-Touch Intercom button (1-10) for the station you want to intercom with. One-Touch button #1represents handset 01, #2 represents handset 02, etc.The Intercom paging ring will be emitted.-OR-You may press the Intercom button, then press the Intercom/Memorybutton (1-10) for the stations you want to intercom with.-OR-Press the Intercom button, and all the registered handsets and thebase except itself list in the log, use the VOL (- or +) key to scroll to thestation you want to intercom with, and then press SELECT soft key toconfirm.NOTE: To abort intercom call, press the STOP soft key.NOTE: If the receiving station does not answer within 30 seconds, theintercom call is cancelled. You will hear an error tone and “Unavailable”shows in the display.Answering an Intercom CallWhen you receive an Intercom call, the display shows the Caller’s Name andPhone ID.If you want to answer with the speakerphone, press the Speaker button. Ifyou want to answer by headset, press the Headset button on the base orthe Talk button on the handset. The headset must be already connected.If you do not want to answer this intercom call, press the REJECT soft key.PageThe page feature helps you locate a misplaced handset.1. Press the Page button on the base. The handset beeps and the VisualIndicator on the handset flashes. “Paging from Base” shows in thehandset display.2. To cancel the page, press the Page button on the base, or press STOPsoft key on the base, or press Exit key on the base, or press any key onthe handset. Otherwise the paging will last for 2 minutes.Auto StandbyIf you place the handset in the cradle while the handset is off the hook(during a call), the call is automatically disconnected.Intercom Calls