2Caller ID SolutionsNo Display• Charge the battery (for 14 hours). Or replace the battery.• Make sure the unit is connected to a non-switched electrical outlet.Disconnect the power adaptor from the base and reconnect it.No Caller ID• You must be subscribed to the standard Name/Number Caller ID servicefrom your local telephone company to receive CID information.BatteryIf you experience any of the following problems, even after recharging thebattery, you may need to replace the battery pack:• Short talk time• Poor sound quality• Limited rangeGeneral Product CareTo keep your unit working and looking good, follow these guidelines:• Avoid dropping the handset, as well as other rough treatment to thephone.• Clean the phone with a soft cloth.• Never use strong cleaning agents, paint thinner, abrasive powder,alcohol, or other chemical products to clean the unit. Doing so willdamage the finish.• Retain the original packaging in case you need to ship the phone at alater date.• Periodically clean the charge contacts on the handset and base with aclean pencil eraser.Other Information