S-Video ConnectionAudio cablesS-Video cableViewing the Picture from the Connected DeviceThe device in this example, a video game console, is connected to the TV’s S-Video andaudio jacks located on the side of the TV. To view the video game console:1. Turn on the TV and the video game console.2. Use the INPUT button on the remote control to toggle through the Video InputChannels until you see SVID displayed in the channel banner.Connecting the DeviceThis connection allows you to connect a device, such as a video game console, that has anS-Video jack. Refer to the illustration which uses S-Video and audio cables.Using the example of a video game console:1. Connect your cable and/or antenna as described on page 5.2. Connect your S-Video cables.S-Video cables fit into a special shaped jack which will be labeled S-Video. Connect theS-Video cable to the jack on the side of the TV and the jack on the video game console.3. Connect your audio cables.Connect the audio (white and red) cables to the R and L Audio jacks on the side of theTV and to the audio output jacks on the video game console. Just match the colors.L AUDIO R S-VIDEOVIDEOVIDEOINPUTL RAUDIOVIDEOOUTPUTS-VIDEOOUTS-VIDEOINL RAUDIOL RAUDIOVideo Game ConsoleSide of TVINPUTbuttonGo to page 5 forinstructions ongetting a signal.23Chapter 1 9Connections & Setup