RCA 27F634T User Manual

Also see for 27F634T: Specifications

RCA 27F634T User Manual Manual pdf 6 page image

4 Graphics contained within this publication are for representation only.Things to Consider Before You ConnectProtect Against Power Surges• Connect all devices before you plug any of their power cords into the wall outlet.• Turn off the TV and/or device before you connect or disconnect any cables.• Using a surge protector can help prevent damage to your TV from electrical power surges. Incase of lightning, unplug your TV.• Make sure all antennas and cables are properly grounded. Refer to the Important SafetyInstructions packed separately.Protect Devices from Overheating• Don’t block ventilation holes on any of the devices. Arrange the devices so that air cancirculate freely.• Don’t stack devices.• If you place devices in a stand, make sure you allow adequate ventilation.• If you connect an audio receiver or amplifier, place it on the top shelf so the heated air fromit won’t flow around other devices. Position Cables Properly to Avoid Audio InterferencePosition Cables Properly to Avoid Audio Interference• Insert each cable firmly into the designated jack.• If you place devices above the TV, route all cables down the side of the back of the TVinstead of straight down the middle of the TV.• If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twinlead cables away from audio/video cables.Use Indirect LightDon’t place the TV where sunlight or room lighting will be directed toward the screen. Use softor indirect lighting.Chapter 1: Connections & Setup