5Warning: Dispose of old batteries promptlyand properly. Do not burn or bury them.Caution: If you do not plan to use the TVwith batteries for a month or longer, removethe batteries. Batteries can leak chemicalsthat can destroy electronic parts.To access the EARPHONE, DC 6V IN, and AVIN jacks on the back of the TV, use a flat-blade screwdriver to unscrew the lockingscrew.Remove the cover and connect the adapteror earphone plug. Store the cover when youare using the jacks and securely replace itwhen the jacks are not in use.AC PowerCautions:You must use a Class 2 powersource that supplies 6V DCand delivers at least 1,000mA. Its center tip must be set to positiveand its plug must fit the TV's DC 6V INjack. Using an adapter that does notmeet these specifications could damagethe TV or the adapter.• Always connect the AC adapter to theTV before you connect it to AC power.When you finish, disconnect theadapter from AC power before youdisconnect it from the TV.Set the adapter's voltage switch to 6V. Plugthe adapter's barrel plug into the TV's DC 6VIN jack. Then plug the other end of theadapter into a standard AC outlet.Notes:• Do not leave the adapter plugged intothe AC outlet or connected to the TVwhen you are not using the TV.• Always unplug the adapter from the ACoutlet first.• Internal batteries automaticallydisconnect when you plug an adapterinto the DC 6V IN jack.• The adapter might become warm afterextended periods of use.!16-3055A.fm Page 5 Wednesday, May 24, 2000 9:01 AM