RCA 4-INCH COLOR TFT LCD TV Owner's Manual

Contents

7OPERATION1. Extend the built-in rod antenna.2. Press POWER to turn on the TV.3. Press VHF/UHF to select VHF or UHF.The TV starts scanning and stops at thenext active channel in the selectedband. A vertical blue line moves acrossthe screen when scanning VHFchannels; a vertical green line moveswhen scanning UHF channels.Note: If the scanning line appears vagueor the tuned channel cannot be lockedwhen operating in battery power, thebatteries might be weak. Replace themwith new alkaline batteries.4. Press CHANNEL < or > to tune to thedesired channel. The scanning line onthe screen aligns with the selectedchannel number below the screen andthen disappears when the channel isreceived.To adjust the brightness, press BRIGHT– or +. The brightness also changes withthe screen's angle.To adjust the volume, press VOLUME –or +.5. Slowly adjust the antenna direction toget the best picture.Notes:• If desired, fold out the stand on theback of the TV and lean the TV on a flatsurface at a convenient angle. The standcan also be used as a handle to carry theTV.• If reception is poor, adjust the length orangle of the rod antenna. If inside ametal or concrete building, movingcloser to a window might improvereception.• Be sure to attach the connecting jacks'cover on the back securely whenoperating the TV in a wet area.16-3055A.fm Page 7 Wednesday, May 24, 2000 9:01 AM