10ENConnectionsC. Using USB portYou can connect a USB flash drive (not included) to the USB port on the unit to play picture files.For operation of file playback on the USB flash drive, please refer to the section “Playing PictureFiles”.Note:• It is recommended that the product is turned OFF when you plug in a USB flash drive.• It does not support USB hard disk mass storage devices, multi-card readers and other USB computerperipherals.• It only supports USB flash drives (FAT32/16, max. capacity 32G bytes, max video bitrate is 7Mbps).• Make sure your USB flash drive is FAT16/FAT32 file system. All other file systems will not besupported.• The USB port may also be used for enabling BD-Live content.D. Connecting to a wired network routerConnect an Ethernet cable (not included) (CAT5 or better with RJ45 connector) to the ETHERNET jackon the back of your unit and to an Ethernet jack on a network hub or router.Note:• Do not connect a modular phone cable to the ETHERNET jack.• When plugging or unplugging the cable, hold the connect on the end of the cable. When unplugging,do not pull on the cable. Press down the lock tab and pull the connector out of the jack.• Because there are various connection configurations, follow the instructions from your internetservice provider.Once connected to a home network with access to the internet, you can:1. Access BD-Live content during playback of BD-Live-enabled Blu-ray Discs (Flash drive needed)2. Access Netflix movie service (appropriate level of Netflix membership required).3. Perform Product Software Updates direct from the internet.Note:• Connect a USB Flash Drive (with 1GB or more free space on it) to the USB port on the front ofthe player for BD-Live operation.• Ensure your Home Network is operating correctly, ensure you have a connection to the Internet.Follow the instructions from your Internet Service Provider, or your Home Network's RouterManual on testing your Home Network's operation.E. Using NetflixYou can instantly watch movies & TV episodes from Netflix streamed over the internet to yourTV via the unit.Activating your playerYou must activate your player before you can use it to watch movies streamed over the internetfrom Netflix.1. To watch movies and TV episodes instantly from Netflix, you must be a Netflix member.If you are already a member of Netflix, this step is not needed (skip to next step).On your computer, visit: www.netflix.comFollow the instructions to become a Netflix member.2. On the player, press the NETFLIX button to select the Netflix mode.3. Follow the on-screen instructions until you see an activation code appear on the screen.4. On your computer, visit: www.netflix.com/activateYou need to log into your account.5. Enter the activation code, and click [Activate] icon.BRC11072E_Eng_NO Pandora & YouTube.indd 10 6/25/2011 10:39:18