RCA L42FHD2X48 User Manual

Also see for L42FHD2X48: Specifications User guide Guía del usuario Guide de l'utilisateur

TroubleshootingMost problems you encounter with your TV can be corrected by consulting the following troubleshooting list.TV ProblemsThe TV won't turn on.• Make sure the TV is plugged in.• Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in another device.• The side panel controls may be locked (disabled). Use the remote control to unlock the side panelcontrols. Select the Block Buttons feature on the Parental Control menu and press OK to uncheck thebox.There is no picture and no sound but the TV is on.• You may be tuned to an input with no component connected to it. If you're trying to view a connectedcomponent, press INPUT until the picture from that component appears.• The Signal Type option may be set incorrectly. Go to page 16 for detailed instructions.• The channel may be blank. Try changing channels.• If you're watching your VCR and it's connected with coaxial cable to the ANTENNA/CABLE jack, tune theTV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Alsomake sure the TV/VCR button on the VCR is in the correct mode (press the TVNCR button on your VCR).The sound is fine, but the picture is poor quality.• If you're getting a black and white picture from a component you've connected to your T_, you mighthave your video cables connected to the wrong jacks. A yellow video cable connects to the yellow VIDEOINPUT jack on the side or back of your TV; three video cables or bundled component video cables (red,blue, and green) connect to the corresponding COMPONENT INPUT jacks on the back of your T_.• Check the antenna connections. Make sure all of the cables are firmly connected to the jacks.• Try adjusting the sharpness function to improve weak signals. Go to page 35 for more instructions.There is no sound, but the picture is fine.• The sound might be muted. Try pressing the volume up button to restore sound.• If using DVI, S-Video, or Y, PB, PR, remember to also connect the device's left and right audio outputjacks to the TV's L and R AUDIO INPUT jacks.• The sound settings may not be set correctly. Go to page 34 for more information.• The internal speakers might be turned off. Go to page 35 for more information.• If your audio source has only one jack or is a (mono) audio source, make sure you have plugged theconnection into the L AUDIO INPUT jack on the TV.42 Other Information