RCA L42FHD2X48 User Manual

Also see for L42FHD2X48: Specifications User guide Guía del usuario Guide de l'utilisateur

6.Whenallcodeshavebeensearched,theCANCELbuttonblinksrapidlytoindicatefailure,andtheremotereturnstonormaloperation.Note; If you accidentally passed the code before saving it, use the le_ arrow to backtrack througl_ the codes. Usethe riglTt arrow to go f7Jrward througl7 the codes again. Once the left or rfght arrow has been pressed, the searchmode changes to Manual Code .fearch.Using the RemoteOnce the remote has been programmed successfully, it is ready to operate your components.To operate the component:1. Press the component button (SAT/AUX or DVD) to set the remote to control the component. Forexample, press DVD to control your DVD player.2. Press ON.OFF to turn the component ON or OFE3. Use the remote buttons that apply to that component.Modes of OperationThe button that corresponds to the mode the remote is in illuminates when you press any button thatapplies to the component. For example, if you're in TV Mode and you press the VOL+ button, the TV buttonlights up. This tells you that the command to increase the volume is being sent to the T_.Note: The remote control may not be compatible vvithall bonds and models of components.Manual ResetThe Manual Reset is used to reset the remote settings to default.Note; The reset can also be accomplished by repl_._clngd_ebatteries; however replacing the batteries does notalways cause a reset. You can perform a manual reset by following these steps;1. On your remote control, simultaneously press the V-Chip, ON.OFF and MUTE buttons.2. The CANCEL button will blink slowly to indicate success, and the remote control returns to normaloperation.Using the Remote Control 23