RCA L42FHD2X48 User Manual

Also see for L42FHD2X48: Specifications User guide Guía del usuario Guide de l'utilisateur

The screen is blank.• Check your connections. If you used red, white and yellow cables to connect, make sure they'reconnected to the red, white and yellow AUDIONIDEO INPUT jacks on the side or back of the T_.• If you're trying to watch something that's playing on a component connected to the TV (like a DVD), pressINPUT until you get to the correct video input channel.• Make sure the component connected to the TV is turned on.• Try another channel.The buttons on the side panel don't work.• The side panel controls may be locked (disabled). Use the remote control to unlock the side panel controlsby selecting the Block Buttons feature in the Parental Control Menu and press OK to uncheck the box.• Unplug the TV for 10 minutes and then plug it back in. Turn the TV on and try again.The TV turns off unexpectedly.• The Sleep Timer may have been activated. Go to page 39 for instructions.• The electronic protection circuit may have been activated because of a power surge. Wait 30 seconds andthen turn the TV on again. If this happens frequently, the voltage in your house may be abnormally high or low.• Unplug. Wait 10 minutes. Plug in again.The TV turns on unexpectedly.• Wake up timer might have been activated. Go to page 39 for instructions.You can't select a certain channel.• The channel may be blocked or not approved in the Parental Control Menu.• If using a VCR, check to make sure the TVNCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR).• Press the TV button and then try to change channels.The stereo reception is noisy.• It may be a weak station. Use the Sound Menu and Sound Type to choose mono.A black box appears on the screen.• Closed captioning might be on. Check Closed Caption in the Setup menu. Go to page 37 for moreinstructions.Other Information 43