Don’t forget:If necessary, connectantenna or cable to geta picture. Go to page 8for instructions.Connecting a Component with Composite Video (Good)To connect a component with a video output jack, such as a DVD player, follow these steps:Example: DVD Player1. Connect the yellow video cable to the (VID 2) VIDEO jack on the side of the TV and to the video outputjack on the DVD player.2. Connect the red and white audio cables to the (VID 2) right and left audio jacks on the side of the TVand to the audio output jacks on the DVD player.Composite Video ConnectionThis is an example of a connection using the composite video jack.Connecting a Component with Component Video (Better)To connect a component that has Y Pb Pr jacks, such as a DVD player, follow these steps:Example: DVD Player1. Connect three video cables or special Y Pb Pr cables to the COMPONENT INPUT 2 (CMPT 2) Y Pb Prjacks on the back of the TV and to the Y Pb Pr outputs on the DVD player.2. Connect your red and white audio cables to the COMPONENT INPUT 2 (CMPT 2) right and left AUDIOjacks on the back of the TV and to the audio output jacks on the DVD player.AUDIO/VIDEOINPUT2 (VID2)10 Chapter 1 Connections and SetupCOMPOSITE VIDEO CABLES ARE COLORCODED-YELLOW=VIDEORED=RIGHT AUDIO; WHITE=LEFT AUDIORedYellowWhite