RCA L42FHD37R User Manual

Also see for L40FHD41: Specifications User guide Guía del usuario Guide de l'utilisateur

PC ConnectionThis is an example of a connection using the PC INPUT VIDEO jack. Go to page 12 for specific instructions.Viewing the Picture from the Connected Component1. Plug in the TV (see page 14 for details) and the component, such as a DVD player or a VCR.2. Turn on the TV and the component you want to view.3. Press the INPUT button on the remote control to display the signal source. Press the up or down arrowto select VID 2 (if connected to the VIDEO INPUT 2 jacks), CMPT 2 (if connected to the CMPT 2 jacks)or HDMI 1 (if connected to the HDMI/DVI INPUT 1 jack). Press OK to confirm your selection. To returnto viewing TV channels, use the number buttons to enter the channel you wish to view.Note: If the picture from the DVD player appears black and white and your component is connected to theVIDEO INPUT, you may be tuned to the wrong input. Make sure you press INPUT and use the up or downarrow until you see VID 1, CMPT 2 or HDMI 1 displayed at the top left of the TV screen. Press OK to confirm.Note: When you have connected all additional components to your TV, go to page 15 for initial setup instructions.Viewing a PC1. Plug in the TV and the computer.2. Turn on the TV and the computer.3. Press the INPUT button on the remote control to display the signal source. Press the up or down arrowto select PC. Press OK to confirm. To go back to viewing TV channels, use the number buttons toenter the channel you wish to view.Note: When you have connected all additional components to your TV, go to page 15 for initial Setup Instructions.AUDIO VIDEOPC INPUTHDMI/DVIINPU 1Connections and Setup Chapter 1 13Don’t forget:If necessary, connectantenna or cable to geta picture. Go to page 8for instructions.