RCA LCDX2722W User Manual

Also see for Scenium LCDX2722W: Specifications

Contents

RCA LCDX2722W User Manual Manual pdf 39 page image

Chapter 5: Other InformationChapter 5 35Graphics contained within this publication are for representation only.TroubleshootingMost problems you encounter with your TV can be corrected by consulting the followingtroubleshooting list.Note for U.S. customers: If you prefer, we can provide you with the name of anAuthorized Service Representative who will visit your home for a fee to install yourelectronic entertainment system and to instruct you in its operation. For details about thisservice, call 1-888-206-3359. For additional assistance while using your RCA Sceniumproduct, please visit www.rcascenium.com/customersupport.TV ProblemsTV won’t turn on• Press the TV button.• Make sure the TV is plugged in.• Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else.• Something might be wrong with your remote control. Press the POWER button on the side panel ofthe TV. If the TV turns on, check the remote control solutions on page 36.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panelcontrols by selecting the Front Panel Block in the Parental Control menu and press OK (box won’thave check mark).Buttons don’t work• If you’re using the remote control, press the TV button first to make sure the remote is in TV mode.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panelcontrols by selecting the Front Panel Block in the Parental Control menu and press OK (box won’thave check mark).• Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.TV turns off unexpectedly• Sleep Timer might have been activated. Go to page 32 for instructions.• Wake Up Timer turned on the TV and no remote or front panel buttons were pressed for two hours.• Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds andthen turn on again. If this happens frequently, the voltage in your house may be abnormally high orlow.• Unplug TV. Wait five minutes. Plug it in again.TV turns on unexpectedly• Wake up Timer might have been activated. Go to page 32 for instructions.Blank screen• Make sure the component connected to the TV is turned on.• Try another channel.Sound problems, picture okay• Maybe the sound is muted. Try pressing the volume up button to restore sound.• If using DVI, RGB, S-Video or Y, Pb, Pr, remember to also connect the component’s left and rightaudio output jacks to the corresponding TV’s AUDIO jacks.• Make sure the Volume option in the Sound menu is turned up.• Make sure headphones aren’t connected to the headphones jack.• If sound is only coming from one speaker, you might have only connected the mono cable to theL AUDIO IN jack. Access the SOUND menu, highlight Sound Type and then choose Mono.Can’t select certain channel• Channel may be blocked or not approved through the V-Chip.• If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press theTV/VCR button on your VCR).Noisy stereo reception• May be a weak station. Access the SOUND menu, highlight Sound Type and then choose Mono.