Chapter 4 41Playing Video CDsTo Load and Play a Video CD1. Press the OPEN•CLOSE button on the front of the DVD player.2. Place a disc gently into the tray with the disc’s label facing up.3. Press OPEN•CLOSE or PLAY to close the disc tray.The DVD player reads the disc’s table of contents, and then displays theplayback control menu or begins disc playback.4. Press STOP to stop playback.The New Meaning of It All LibraryVolume OneAll Hands in the Cookie JarAll Hands in the Cookie JarInsert with thelabel facing up.If the Video CD Has Playback ControlIf a disc is encoded with the playback control function, a menu screenappears after the disc is loaded into the player.1. Use the number buttons on the remote to select a track.2. Press OK or PLAY to begin playback of the selected track.4. Press GO BACK to stop playback and return to the menu or press STOPto stop playback and remove the menu from the screen.Bypassing Playback ControlIf a Video CD has playback control, you can bypass the disc’s menu byfollowing these steps when you first load the discs.1. Press STOP to put the player in the stop mode.2. Use the number buttons on the remote to enter the desired tracknumber, and then press PLAY. When playback begins, the disc willrespond as if it is not in the Playback Control mode.Resuming Playback ControlTo resume the Playback Control mode, press MENU (the disc’s menuappears).
