CHOICE LISTSChoice lists are used to choose a particular setting from a list of settings.1. Point to a choJce on a menu and press MENU or OK to select thatchoice,Now that you know how to access the menus and adjust the controlpanels, the following pages provide a brief explanation of all the menufeatures, The features are organized in order of their location on theMain Menu,AUDIO MENUMute Press OK to reduce the TV's volume to its minimum level, PressOK again to restore the volume,Tone Controls Displays the slider controls for adjusting the TV's treble,bass and balance.Audio Processor Displays a choice list of available audio modes, whichcontrol the way the sound comes through your speakers.Mono Plays the sound in mono only. Use this setting whenreceiving broadcasts with weak stereo signals.Stereo Splits the incoming stereo audio signal into left and rightchannels, Most TV programs and recorded materials have stereoaudio, The TV displays the word STEREO when you tune to aprogram that is broadcast in stereo.Sound Logic TMStereo Sound Logic technology monitors aprogram's audio track and limits volume excursions to a minimumand maximum volume range from the current volume setting,Acting like a dynamic range, it compresses to limit sudden volumeincreases, like when a commercial comes on,I Audio30