PiP Buttons: General ExplanationThe buttons on the remote control that you'll use for the PIP feature areexplained below:PIP Press the PIP button to make the PIP window appear on the screen,Press PIP again to remove the window,If you selected Alternate with PIP button in the PIP Closed-CaptionDisplay menu, press the PIP button when the PIP window is on the screento toggle between PIP on, PIP on with closed captions, and PIP off,Arrow buttons (left, right, up, and down) Move the PIP window todifferent areas of the screen,CH CTRL (channel control) Lets you switch channel control betweenthe PIP window and the main picture, To determine whether you arecontrolling the PIP or the main picture, look at the TV screen: the yellowchannel number is the one you are controlling. Press CH CTRL to changewhich picture you're controlling.SWAP Switches, or "swaps," where the two pictures appear on the TVscreen. The smaller PIP picture swaps to the main screen and the mainpicture goes to the little PIP window.PiPbuttons,0 _0 _0,0,0 o0,0 _0 o00°00ArrowbuttonsThe buttons on tile remote control that operate thePIP Feature include: the rout arrow buttons, CHC TRL, PIP and SWARPIP TroubleshootingIf you use a cable box, you rnust connect a splitter in order for PIP(pictureqmpicture) to work. You must also check somesettings in your TV's menu system in order for all of the GUIDE Plus+ Gold System features to work, Pleasefollow theinstructions below, If you have trouble, contact your cable company.CABLEBOX TV1.2.3.4.5,Connect as shown,Turn on theTV and press MENU on theremote (the TV MAIN MENU appears).Select GUIDEPIus÷ Menu (press 7 on theremote control).Keep advancing through the screens untilyou come to the one that asks you if youhave cable, Select Yes.The next screen asks you if you have a cablebox, press the arrow down button tohighlight No, Then press OK.For additional Troubleshooting information go to the end of this section.52