V-CHIP MOVIE RATING LIMITYou set movie rating limits by blocking movies rated above a specified level.Blocking Movie RatingsIf you only want your child to watch movies that have a PG rating and lower(in other words, movies rated PG and G), then you could automatically blockout all other movies with higher ratings,To blockmovies:1. Highlight the rating field and press the up and down arrows to find therating that is the lowest rating you do not want the child to watch. (Inthe example above, you would point to the rating status buttoncorresponding to PG-13, since the highest rating you want the child towatch is PG.)2. Use the right arrow to highlight the rating status field. Press the up anddown arrows to change the button from VJewto Block. All higherratings' View buttons will automatically change to Block.Ra ring sra tusRating field field• Some movies may be given a NotRated (NR) rating. After blockingJmovie ratings, you must set NR toView separately to view NRmovies.3. Press OK to return to the menu or exit the screen.4. If Parental Controls are not locked, you must lock them so the movierating limits will take effect. See the section Locking Parental Controls.Viewing Movie RatingsAfter you block movie ratings, you have the option of changing some of therating status buttons back to View:1. Highlight the rating field and press the up and down arrows to find therating you want to view.2. Use the right arrow to highlight the rating status field. Press the up anddown arrows to change the button from Block to View.For example, if movies with a rating of PG-13 and higher are blocked,you can change the rating status button corresponding with NC-17. Yourchild would then be able to watch all movies with a G, PG, and NO17rating.3. Press MENU or OK to return to the menu or exit the screen, and be sureparental controls are locked (see the section Locking Parental Controls).r You must remember to LockParental Controls for rating limitsJto take effect.Rating field Rating sratus field42