RCA RCU410 User Manual

Also see for RCU410 - Universal Remote Control: Code List User guide

Contents

RCA RCU410 User Manual Manual pdf 12 page image

(BLINK)Programming With Code Search1. Turn on the device you wishto program.2. Press and hold CODE SEARCHuntil the INDICATOR LIGHTlights, then release CODESEARCH.3. Press and release the devicebutton for the device you areprogramming (TV, VCR orDBS•CABLE). The INDICATORLIGHT will blink once thenremain lit. DVD codes areprogrammed under the VCRbutton.Note: For AUX, press DVD•AUX thenthe device button you areassigning to DVD•AUX.4. Press and release ON•OFF untilyour device turns off.Important: You may have topress ON•OFF up to 200 times.5. When your device turns off,press the ENTER button, theINDICATOR LIGHT will go off.If your TV, VCR, DVD, DBS or Cable Box does not respond after you havetried all the codes for your brand, or if your brand is not listed, trysearching for your code by following the steps below.Retrieving Codes1. Press and hold CODE SEARCHuntil the INDICATOR LIGHTlights, then release CODESEARCH.2. Press and release the devicebutton for the device’s codeyou are retrieving (TV, VCR orDBS•CABLE). The INDICATORLIGHT will blink once thenremain lit.Note: For AUX, press DVD•AUXthen the device button for thecode you are retrieving.3. Press and release CODESEARCH. The INDICATORLIGHT will turn off.4. Starting with 0 on the keypad,press the number buttons inorder (0-9) until theINDICATOR LIGHT blinks.5. The number which causes theINDICATOR LIGHT to blink isthe first digit of your code.6. Repeat step 4 until you haveretrieved all three numbers inthe code.If you need to find the three-digit code for your TV, VCR, DBS, DVD orCable Box after your device is set-up using Code Search, use this procedure.…(OFF)INDICATORLIGHT(BLINK)VCR TVON OFF(OFF)INDICATORLIGHT11CODESEARCHCODESEARCHCODESEARCHDVD•AUX DBS•CABLE(BLINK)VCR TVDVD•AUX DBS•CABLE