Battery InstallationYour Universal Remote requires 2 new AAA alkaline batteries.To install the batteries:1. On the back of the remote, push and slide the cover off.2. Match the batteries to the + and - marks inside the batterycase, then insert the batteries.3. Press and slide the battery cover back into place.Note: Reprogramming may be required after batteries are removed.INDICATOR LIGHTThe Indicator Light flashes to show that the remote is working.ON•OFFThe ON•OFF button operates the same as your original remote Note:Some RCA, GE and ProScan models require you to press the device buttonto turn the device on and the ON•OFF button to turn the device off.CODE SEARCHUsed to program the remote or to search through codes.TV, VCR, DVD•AUX, DBS•CABLEThe TV, VCR, DBS•CABLE, and DVD•AUX buttons are used to select thedevice you want to control.REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSEThe REVERSE, PLAY, FORWARD, RECORD, STOP, and PAUSE buttonsoperate the same as on your original VCR or DVD remote. You must pressthe RECORD button twice to begin recording.TV•VCRWhen in VCR mode, the TV•VCR button operates the TV•VCR functionof your VCR.ENTERThe ENTER button is used to complete channel selection for some brandsof TV. It is also used to complete the code entry process, finally, it is usedin Menu Mode as a Select or OK.VOL & CHThe VOL (Volume) and CH (Channel) buttons increase or decrease thechannel numbers or volume.MUTETo MUTE the volume on the TV.PREV CHPREV CH allows you to go to the previous channel you selected. Operatesthe same as Last Channel, Go Back or Recall button on your originalremote.0-9The number buttons operate the same as on your original remote, and areused for entering device codes or channel numbers.MENUThe MENU button calls up the TV, DBS and DVD set up menus.SLEEPThe SLEEP button allows you to set a time to turn off the TV automatically.Button Description3