RCA RCU410 User Manual

Also see for RCU410 - Universal Remote Control: Code List User guide

Contents

RCA RCU410 User Manual Manual pdf 17 page image

Trouble ShootingProblemIndicator light not blinking whenyou press any buttonThe Remote does notoperate your deviceNot performing commandsproperlyProblems programming a TV/VCRCombo UnitVCR not recordingChannel up and down do notfunction on an RCA TVProblems changing channelsNo response after pressinga buttonSleep feature does not workSolutionA) Replace the batteries with 2 newAAA Alkaline batteries.B) Check that batteries areproperly installed.A) Try all the codes listed for yourbrand.B) Try the Code Search method(page 11).Start Code Search over again tolocate the proper code.Try the VCR code for your brand.Some combo units, however, mayrequire both a TV and a VCR codefor full operation.As a safety feature on your remote,you must press the REC buttontwice.Due to some designs, the originalremote will only perform thesefunctions.If your original remote requiredENTER after a channel, pressENTER after you select achannel.A) Make sure you have new batter-ies, and you are aiming your remoteat your devices.B) Check that batteries are properlyinstalled (See page 3).Remote must remain aimed at tele-vision after sleep is set in order for itto work.Note: Reprogramming may be required after batteries are removed.For Customer Service, contact the RCA Help Center at: www.rca.com16