RCA SCENIUM HDTV with DLP technology High-Definition Television User Manual

Also see for Scenium HD50LPW164: Specification sheet

Contents

RCA SCENIUM HDTV with DLP technology High-Definition Television User Manual Manual pdf 18 page image

Connections & Setup16 Chapter 1How to Connect: TV + Satellite Receiver + VCR1. Connect your cable and/or off-air antenna.If you have cable and an off-air antenna, connect the cable signal to CABLE INPUT. Connect the off-air antenna toANTENNA INPUT.2. Connect your VCR to your TV.A. Connect the VCR’s audio/video outputs to INPUT 1 (R and L-Audio, and V-Video) on the TV using composite audio/video cables.B. Connect the VCR’s audio/video inputs to the AUDIO/VIDEO OUTPUT jacks on the TV. This enables recording ofdigital and analog programs (except copy protected or component video formats).3. Connect your Satellite Receiver to your TV.Connect the satellite receiver’s audio output jacks to the INPUT 3 R and L Audio jacks and the S-Video output jack to theS-VIDEO jack on the TV using audio cables and an S-Video cable. If your satellite receiver doesn’t have an S-Videooutput, you can make the video connection by using the V (Video) jack instead. If your satellite receiver has componentoutputs, then use INPUT 2 or 4.Note: If you are using an S-Video cable or component video cables, you must also connect audio cables. The S-Videocable and component video cables only transfer video information.Viewing the Components1. Turn on the TV and the component(s) you want to view.2. Press the TV button on the remote control.3. Press the INPUT button on the remote control to scroll through the Video Input Channels.• View the VCR on the INPUT 1 channel.• View the satellite receiver on the INPUT 3 channel.Note: You can set up the TV to automatically tune to the correct Video Input Channel. This is called Auto Tuning. (SeeChapter 3 for more information.)Go to page 21SatelliteReceiverVCR CABLEANTENNA IN VIDEOAUDIO LRANTENNA OUTIN OUTVCRVIDEOAUDIO LROINPUT 1LR S-VIDEOVCABLEINPUTETHERNETTVDIGITALAUDIOOUTPUTAUDIO/VIDEOOUTPUTVR LCableCARD™COMPOSITE INPUTSINPUT 2ANTENNA INPUTCOMPONENT/COMPOSITE INPUTSUse menu for composite video.LR P R P B Y/VIDEOHDMI/DVI INPUTUse menu for DVI audio.POWER(AC 120V~60Hz)FIXED/VARIABLE AUDIO OUTPUTSEXTERNAL AMPMAX POWER RATING!(60 WATTS into 8 OHMS)CENTER SPEAKER INPUTSUBWOOFERCENTER R REAR L REARMATRIXSURROUNDOUTPUTSR L WIREDIRINPUT 3LR S-VIDEOVINPUT 4LR P R PB Y/VIDEOVIDEO LR S-VIDEOSATELLITERECEIVERAUDIOFACTORY USE ONLYOFF-AIR ANTENNA12B32AMENU CHCHVOL — VOL + POWERTV1