RCA SCENIUM HDTV with DLP technology High-Definition Television User Manual

Also see for Scenium HD50LPW164: Specification sheet

Contents

RCA SCENIUM HDTV with DLP technology High-Definition Television User Manual Manual pdf 60 page image

58 Chapter 4Using the TV’s Menu SystemUse the keyboard or the remote's arrow keys to enter thehost name. This may be the only setup you need to do.Reset All4Proxy Server3IP Address2Host NameHost Name1Go Back0Main Menu Connections Ethernet SetupSome Internet Service Providers (phone/cable company)may require you to provide them with your TV's EthernetMAC (Media Access Control) address and assign you with adevice host name to enter below. This is usually NOTrequired if connecting to an ISP through an Ethernetgateway device (e.g. router) supporting NAT/PAT,sometimes referred to as a DSL/Cable Modem router.This is your device's MAC address:00 11 22 33 44 55If your Ethernet gateway device supports DHCP, theDomain Name will appear here:domain.name.here.If required, enter the device hose name below:Initial Volume2Maximum Volume3CableCARD Tools4Remote Setup5Text hereInitial Channel1Go Back0Main Menu Connections Special FeaturesRemote Setup can be used to control up to three TV's in thesame location. Press OK to continue.Select the remote mode that this TV should respond to:Use this screen if you want to set up this RCA TVto respond to a different RCA TV remote mode. Bydoing so, you can independently control two RCATVs that are near each other simply by changing the modeof the remote. A third RCA TV can be added to thesame location and controlled separately if it has this screenand is set up to respond to a remote mode that is differentthan the first two RCA TVs.TV3TV2TV (default)Special FeaturesThe special features options are mostly intended for commercial/retail use.Initial Channel You can select the tuner and channel or input that yourTV tunes to each time the TV is turned on by plugging it back in.Initial Volume This feature works only if the Initial Channel feature is setto On. Select the volume level that you want when the TV is turned on.Maximum Volume This feature is intended to stop the volume frombeing turned up too loudly. Set the volume at the loudest level you wouldwant to hear.CableCARD Tools Displays information available for digital cable TVservices when a CableCARD is inserted in the back of the TV and you havesubscribed to digital cable service. Go to page 18 for more information onusing your CableCARD.The CableCARD Tools information might vary according to the brand of cardyou have inserted into your TV. The graphic to the left is an example ofwhat you might see. Select an option to view more information.Some CableCARD Tools screens might have additional information displayedon more than one page. Use the arrow buttons on the remote to highlightthe blue Continue link at the bottom of the page, for example, as thegraphic to the left shows, and simply press the OK button on the remote toread more text. If more than one link appears, use the arrow buttons tohighlight the one you want. To exit the screen, press CLEAR on the remote.Initial Volume2Maximum Volume3CableCARD Tools4Remote Setup5Text hereInitial Channel1Go Back0Main Menu Connections Special FeaturesPress 5 or 6 to point to an option, then press OK toselect it. Press 3to return to the menu.Select what should occur when power is restored to the TV:Note: An Initial Channel setting of "On" will be enabled onlywhen the TV is plugged back in or electricity is otherwiserestored to the TV. Initial Channel is not enabled from theturning on of the TV with the remote or front buttons.On: Go toOn: Go to last input or channel selectedOff: Initial Channel is disabled999Channel Sub-channel 999Cable InputExample status screen fordigital cable televisionservice.Example status screen fordigital cable televisionservice.Example status screen fordigital cable televisionservice.Example status screen fordigital cable televisionservice.Example status screen fordigital cable televisionservice.Example status screen forContinueInitial Volume2Maximum Volume3Remote Setup5CableCARD Tools4Initial Channel1Go Back0Main Menu Connections Special FeaturesTwo lines of help text will apear in this area to explain thefeature and instruct the user on how to use it.Network SetupCableCARD™ StatusCableCARD™ PairingConditional AccessRemote Setup This features allows you to control three different RCA TVs.This is helpful if you have two or three RCA TVs near each other, and theyalso have this menu option, but you want to control them independent ofeach other. Program a second RCA TV to the DVD, VCR, AUX, SAT/CABLE,or AUDIO component button, using the TV2 code 1222. Select the TV2option in that TV’s Remote Setup menu. If you have a third RCA TV,program a component button using the TV3 code 1223. Select the TV3option in that TV’s Remote Setup menu. Go to Chapter 2 for moreinformation on programming your remote.Ethernet SetupAn Ethernet connection allows your TV to be upgraded if a software upgrade isavailable. Connect your TV to a router and cable modem via the ETHERNETjack. Then, go to the Software Upgrade menu to see if a software upgrade isavailable. If you have a NAT (Network Address Translation) /PAT (Port AddressTranslation) component with DHCP capability (router, etc.), no setup isrequired. The TV automatically sets itself up for Ethernet use. If you do not havea NAT/PAT router, you may need to establish some settings in conjunction withyour ISP (Internet Service Provider) before you can connect to the Internet.If an IP address isn’t assigned for you, contact your network administrator forthe necessary information.A Reset All selection is provided for your convenience if you move to anothercity and must enter new information, or enter some incorrect information.