RCA SCENIUM HDTV with DLP technology High-Definition Television User Manual

Also see for Scenium HD50LPW164: Specification sheet

Contents

RCA SCENIUM HDTV with DLP technology High-Definition Television User Manual Manual pdf 46 page image

Using the TV’s Features44 Chapter 3Channel 2, 3 or 4 Antenna Input Component is connected to the ANTENNA INPUT jack on the back of theTV, and you want the TV to tune to channel 2, 3, or 4 when you press the corresponding button on the remote.Reminder: make sure the component’s Channel 2/3 or 3/4 switch is set to match the channel you choose inAuto Tuning.Input 1, Input 3 Component is connected to the Input 1 or 3 Video (V) or S-VIDEO jack on the back of the TVand you want the TV to tune to the Video Input Channel when you press the corresponding button.Input 2, Input 4 Compatible video source, such as a DVD player or satellite receiver, is connected to theInput 2 or 4 COMPONENT/COMPOSITE INPUT jacks (Y/Video, Pb, Pr) on the back of the TV and you want theTV to tune to the composite/component video input when you press the corresponding button.Front Input Component is connected to the S-VIDEO IN or VIDEO IN jack on the front of the TV and you want theTV to tune to the front Video Input Channel when you press the corresponding button.HDMI Component is connected to the HDMI/DVI jack on the back of the TV and you want the TV to tune tothis input when you press the corresponding button.PIP (Picture-in-Picture) OperationThe PIP (Picture-In-Picture) feature lets you display a second, smaller analog (NTSC format) picture on top ofthe main analog picture. You will only be able to use the PIP window and main picture with analog channelsand inputs; PIP doesn’t support digital signals. The main and PIP channels must be from different tuners orinputs; for example, main is from INPUT 1 and PIP is from ANTENNA INPUT. If you are only using tuners forPIP and main, you must have the main picture from CABLE INPUT and the PIP picture from ANTENNA INPUT,or vice-versa.PIP ButtonsThere are certain remote buttons that control the way the PIP windowworks:PIP Brings up the PIP window. Press PIP again to remove the window.Arrows Let you move the PIP window to different areas of the screen.SWAP Switches the video from the PIP window to the main picture.FREEZE Freezes entire screen, including the main picture and PIPwindow, if PIP is displayed.CH CTRL (Channel Control) Lets you switch channel control betweenthe PIP window and the main picture. To determine whether you arecontrolling the PIP or the main picture, look at the channel banner as youchange channels or press the INFO button. The triangular indicator ( )beside the channel number lets you know which picture you’recontrolling with channel up/down, number buttons, etc.TipIf you want to go directly to an input or channel in PIP(or main), set up auto tuning and press the componentbutton (VCR, DVD, etc.).ArrowbuttonsPIPbuttonsCH. CTRLSKIPPIP SWAPPRESETS FAVCCSOUNDCLEARFORMAT INFOMENUFREEZEiLIGHTCCCCCC MMPIP Ch 8 Unrated Cable InputCh 8-1 WLPJ Antenna Input4:3 Normal 480i SDListening to English in SRSMPAA - Not Rated12:39 PM12:30 AM00:30Program Title/Acquiring ChannelPIP channel numberMain picturechannelnumberChannelcontrolindicator