RCA Scenium DRS700N User Manual

38 chapter 5Graphics are for representation only. Your unit might differ from pictures in this book.Additional InformationThe picture is distorted• Did you connect your VCR to the DVD Player? Disconnect it, and connect the VCR directlyto the TV and the DVD Player directly to the TV. See chapter 1 for correct setup andconnection information.• The disc might be damaged. Try another disc.• If you’re using FORWARD or REVERSE buttons, it is normal for some distortion to appearwhile scanning.A screen saver appears on the TV• Your player is equipped with a screen saver that appears on the TV after your player hasbeen idle for several minutes. To make it disappear, press STOP or CLEAR on the remote.Subtitle and/or audio language is not the one selected from the initial setting• If the subtitle and/or audio language does not exist on the disc, the initial settings will notbe seen/heard. The disc’s priority language is selected instead. Set the subtitle and/or audiolanguage manually through the Info Display or the player menu.The menu is displayed in a foreign language• The Language menu (Player Menus) is set to that language. Go to Languages (In Spanish,shown as Idiomas; in French, as Langues) in the main DVD player menu and select thePlayer Menus option (In Spanish, shown as Menús del Lector; in French, as Menus Lecteur)Highlight the language you prefer, and press OK.Play doesn’t begin• The rating of the title on the disc exceeds the rating limit set in the Ratings Limits menu.Unlock the player and/or change the rating limit in those menus.No forward or reverse scan• Some discs have sections that prohibit rapid scanning, or title and chapter skip.• If you’re trying to skip through the warning information and credits at the beginning of amovie, you won’t be able to. This part of the movie is often programmed to prohibitskipping through it.Desired angle cannot be changed• Most discs don’t have the multi-camera angle system, and some discs only have mutlipleangles during certain parts of the movie.Picture is too tall and thin• Change the aspect ratio: go to the main menu, select Display, select TV Image. Go to page30 for more information.Picture is too short and wide• Change the aspect ratio: go to the main menu, select Display, and select TV Image. Go topage 30 for more information.DRC700.part2.7.26.02 8/1/02 11:09 AM Page 38