REED SD-1128 Instruction Manual

Also see for SD-1128: User manual

Contents

REED SD-1128 Instruction Manual Manual pdf 12 page image

reedinstrumentswww com 12ne 534 Bluene 123 Yellowne 485 Redne 123 Yellowne 534 BlueRich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5value is set, press the Enter Button to adjust the Month, Date, Hour,Minute, and Second values.2) After all the time values have been set the screen will jump to “SDcard Decimal character” setting screen. To exit “Advanced Set-tings”, press the Esc Button.Note: After the time value is set, the internal clock will run even whenthe power is off, if the battery is under normal conditions.Setting the Decimal point on the SD Card1) When the lower display shows “dEC”, use the Up or Down Buttonsto toggle between “bASIC” (“.” Decimal Point) or “Euro” (“,” Deci-mal Point).2) After the Decimal point character has been selected, press theEnter Button to save the setting as the default. To exit “AdvancedSettings”, press the Esc Button.Auto power OFF management1) When the lower display shows “PoFF”, use the Up or Down But-tons to select the value “yES” (Enable Auto Power Off) or “no”(Disable Auto Power Off.2) After selecting “yES” or “no”, press the Enter Button to save thesetting as the default. To exit “Advanced Settings”, press the EscButton.Set Beeper Sound ON/OFF1) When the lower display shows “bEEP”, use the Up or Down But-tons to select “yES” (Beeper Sound is ON) or “no” (Beeper Soundis OFF).2) After selecting “yES” or “no”, press the Enter Button to save thesetting as the default. To exit “Advanced Settings”, press the EscButton.Select the Thermometer to Type K or Type J1) When the lower display shows “tYPE”, use the Up or Down Buttonsto select “K” (for Type K Thermometer) or “J” (for Type J Thermom-1.888.475.5235info@REED-Direct.com REED-Direct.com