REED SD-1128 Instruction Manual

Also see for SD-1128: User manual

Contents

REED SD-1128 Instruction Manual Manual pdf 7 page image

reedinstrumentswww com 7ne 534 Bluene 123 Yellowne 485 Redne 123 Yellowne 534 BlueRich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5Function selection1) Turn on the meter by pressing the Power Button. To turn the meteroff, hold the Power Button for over 2 seconds.2) The meter has 2 measuring functions to choose from: Light Meteror Type K/J Thermometer. When the meter is on, press and hold theFunction Button. The display will flash “LIgHt”, for Light measure-ment, and “tP” for Type K/J Thermometer measurement. Releasethe Function Button to choose the displayed function.Light Measurement1) When the meter is off, plug the Probe into the Probe Input Socket,then power on the meter by pressing the Power Button.2) Select the “ LIgHt “ function (see Function Select).3) Hold the Probe Handle and face the Probe Head against the mea-suring light source. The Display will show the light measurementvalue.Changing the Light Meter unitTo change the Light Meter unit, press and hold the Unit Button, while inthe Light Meter Function. The display will flash the units LUX and Ft-cd.Release the Unit Button to select the displayed unit. The selected unit willbe saved as the default.Zero AdjustmentWhile taking a Light Measurement, completely cover the light sensor. Ifthe Display does not show value of zero, press and hold the Logger But-ton until the Display shows a zero value.Type K/J Thermometer measurement1) Select the “tP” function (see Function Select)2) Plug the optional Type K or J Thermocouple Probe into the TypeK/J Probe Input Socket. continued...1.888.475.5235info@REED-Direct.com REED-Direct.com