REED SD-1128 Instruction Manual

Also see for SD-1128: User manual

Contents

REED SD-1128 Instruction Manual Manual pdf 13 page image

reedinstrumentswww com 13ne 534 Bluene 123 Yellowne 485 Redne 123 Yellowne 534 BlueRich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5eter).2) After selecting “K” or “J”, press the Enter Button to save the settingas the default. To exit “Advanced Settings”, press the Esc Button.Select the Temperature unit to °C or °F1) When the lower display shows “t-CF”, use the Up or Down Buttonsto select “C” (for °C) or “F” (for °F).2) After selecting “C” or “F”, press the Enter Button to save the set-ting as the default. To exit “Advanced Settings”, press the EscButton.Set sampling time1) When the lower display shows “SP-t”, use the Up or Down Buttonsto adjust the value to either 0, 1, 2, 5, 10, 30,60, 120, 300, 600,1800, or 3600 seconds.2) After the Sampling value is selected, press the press the Enter But-ton to save the setting as the default. To exit “Advanced Settings”,press the Esc Button.SD memory card FormatPlease Note: Formatting the SD card erases all data from that SD card.1) When the lower display shows “Sd F”, use the Up or Down Buttonsto select “yES” (format the SD card) or “no” (do not format the SDcard).2) To format your SD card, select “yES” and press the Enter Button.The Display will show “yES Enter”, to confirm. Press the Enter But-ton to confirm.PC Serial InterfaceThe instrument features an PC output via 3.5 mm terminal. The connectoroutput is a 16 digit data stream which can be utilized to the user’s specific1.888.475.5235info@REED-Direct.com REED-Direct.com