IntroductionOperating_Manual_Fan_KXE_04_en.docx 10 / 128The fan is configured in conformity with the standardsspecified as follows:- DIN 24166 “Fans; technical delivery conditions”(German Industrial Standard)- VDMA 24167 “Ventilatoren –Sicherheitsanforderungen”(Industrial fans, safety requirements - VDMA –Verband Deutscher Maschinen- und Anlagenbau eV –German Engineering Federation)- DIN EN ISO 12100 “Safety of machinery - Generalprinciples for design”- DIN EN ISO 12499 “Industrial fans - Mechanical safetyof fans - Guarding”- DIN EN 60204-1 “Safety of machinery - Electricalequipment of machines”- DIN EN 61000-6-2 “Electromagnetic compatibility(EMC) - Immunity standard for industrial environments”- DIN EN 61000-6-4 “Electromagnetic compatibility(EMC) - Emission standard for industrial environments”The impeller has been balanced in accordance withDIN ISO 1940-1 “Mechanical vibration - Balance qualityrequirements for rotors in a constant (rigid) state”.Fan configuration in accordance with ATEX (optional):If the fan is intended for use in potentially explosiveenvironments pursuant to Directive 2014/34/EU (ATEX), thefan complies additionally with the standards specified asfollows:- DIN EN 1127-1 “Explosive atmospheres - Explosionprevention and protection”- DIN EN 14986 “Design of fans working in potentiallyexplosive atmospheres”- DIN EN 13463-1 “Non-electrical equipment for use inpotentially explosive atmospheres”- DIN EN 13463-5 “Non-electrical equipment for use inpotentially explosive atmospheres - Protection byconstructional safety 'c'”2.4 Regulations and standards
